AV-over-IP with
Zero Compromise,
Infinite Possibilities.

DisplayNet is an award-winning product family for AV distribution that leverages proven 10GbE Ethernet technology to switch, extend and distribute uncompressed AV signals in real time with resolutions of up to 4K/60p. DisplayNet is built on SDVoE technology and provides unmatched image quality with zero frame latency, zero compression* and zero artifacts. Unlike conventional matrix switchers, DisplayNet also integrates powerful features, such as Software-Defined MultiViewer, and Advanced Video Wall. These features enable a wide range of applications within a single system, replacing numerous dedicated components.

* For resolutions of up to 4k/30p

AV Signal Distribution Over 10GbE

Matrix Switcher Application Diagram
Matrix Switching

DisplayNet renders traditional matrix switchers obsolete and is the ideal solution for small, medium, large and massive AV systems.

Learn More >
Video Wall Application Diagram
Video Wall

The Scaler in DN-200 and DN-300 Series receivers supports Advanced Video Wall processing, with native support for asymmetric video walls.

Learn More >
MultiViewer Application Diagram

The scaler in DN-200 and DN-300 Series transmitters enables Software-Defined MultiViewer functionality, with custom layouts and up to 32 sources.

Learn More >
Point-to-Point Extension Application Diagram

DisplayNet can extend AV signals up to 330 ft. (100m) over copper or 18 miles (30km) over fiber optic media.

Learn More >
SDVoE Alliance Logo

DisplayNet harnesses SDVoE technology to leverage the power of 10GbE switches for uncompressed zero-frame latency AV signal distribution. SDVoE is the only interoperable AV-over-IP platform that can deliver the performance of a dedicated matrix switcher, and represents the next generation in AV distribution.

Zero Frame Latency

DisplayNet can transport AV signals up to 4K /60p (4:4:4) with zero frame latency. This is critical for professional AV applications such as live events, KVM workstations, and mission critical environments.

Zero Compression

DisplayNet distributes resolutions up to 4K /30p (4:4:4) with zero compression. For higher resolutions signals, a lossless, real-time pixel pipeline compression algorithm is used. The maximum compression ratio employed is about 1.4:1.

Zero Artifacts

Unlike low-bandwidth AV-over-IP solutions, DisplayNet does not introduce artifacts into the source signal. This is achieved by delivering an uncompressed image for all resolutions up to 4K/30p. For higher resolutions DisplayNet's compression algorithm is completely free from image artifacts.

Infinitely Scalable

Unlike traditional AV matrix switchers, the number of endpoints in a DisplayNet system is only limited by the number available 10GbE switch ports. Since 10GbE is fully duplex (10Gbps upstream and downstream), any switch port can be assigned to a DisplayNet transmitter or receiver unit. I/O arrays of virtually any size are possible by proper selection of the central 10GbE switch.

Device Auto-Discovery

Device Auto-Discovery enables endpoints to be hot-plugged and recognized by the system within a few seconds. This feature allows systems to be easily reconfigured and/or expanded in the field without the need for extensive programming.

Broad Range of Signal Types

DisplayNet supports a wide range of AV signal types: HDMI 2.0 and DisplayPort 1.2 (with HDCP 2.2), Embedded Audio, Downmixed Audio, Analog Audio, High Speed USB 2.0 (480 Mbps.), 1GbE, RS-232, and bidirectional IR.

HDMI 2.0 DisplayPort 1.2 HDCP 2.2 Embedded Audio Downmixed Audio Analog Audio USB 2.0 1GbE RS-232 Infrared

Multi-Layer Switching

All of the available signal types can be routed completely independently of each other. The available switching layers include: Video, Embedded Audio, Analog Audio, Downmixed Audio, High Speed USB 2.0 (480 Mbps.), bidirectional IR, and RS-232.

Multi-Layer Switching Illustration Multi-Layer Switching Illustration

Copper Transport

Up to 330 ft. (100 meters)

The DN-200 and DN-300 Series include a copper 10GbE network port that supports twisted pair (CAT6a or CAT7) media up to 330 ft. (100 meters). Extend flawless signal quality across a room or an entire facility.

Single Building
Single Building
Building Complex

Fiber Optic Transport

Up to 18 miles (30 km)

The DN-200 and DN-300 Series also include an optical 10GbE port that can accommodate a variety of direct connection copper cables, AOC and SFP+ modules to achieve transmission distances over 18 miles (30 km). Go beyond the limits of normal AV signal extension to support massive campus-wide installations.

Building Complex