| MultiPort Extenders |
|
|
 |
DVI-TPS-TX90
DVIGear models DVI-TPS-TX90 and DVI-TPS-RX90 form a high-performance twisted pair extension system designed for a wide range of professional HDMI signal distribution applications more details > |
|
|
|
| |
|
|
 |
DVI-TPS-RX90
DVIGear models DVI-TPS-TX90 and DVI-TPS-RX90 form a high-performance twisted pair extension system designed for a wide range of professional HDMI signal distribution applications more details >
|
|
|
|
| Single-link DVI Extenders - 1x CAT6A |
|
|
 |
Single-Link DVI CAT6 Transmitter, 1x RJ45
DVI-TP-TX200
Supports DVI without HDCP only, DVI output for local monitor, Advanced EDID Management with 100 memories, rack-mountable. Requires 1x CAT6a / CAT7 cable for optimum results. |
|
|
|
| |
|
|
 |
Single-Link DVI CAT6 Transmitter, 2x RJ45
DVI-TP-TX300
Supports DVI without HDCP only, DVI output for local monitor, 2x RJ45 outputs can drive 2 Receivers simultaneously, Advanced EDID Management with 100 memories, rack-mountable. Requires 1x CAT6a / CAT7 cable per output for optimum results. |
|
|
|
| |
|
|
 |
Single-Link DVI CAT6 Receiver, 1x RJ45
DVI-TP-RX100
Supports DVI without HDCP only, Auto and Manual cable equalization modes, Pixel Accurate Re-Clocking, rack-mountable. Requires 1x CAT6a / CAT7 cable for optimum results. |
|
|
|
| Dual-Link DVI Extenders - 2x CAT6A |
|
|
 |
Dual-Link DVI CAT6 Transmitter, 2x RJ45
DVI-TP-TX200-DL
Supports Dual-Link DVI without HDCP only, Dual-Link DVI output for local monitor, Advanced EDID Management with 100 memories, rack-mountable. Requires 2x CAT6a / CAT7 cables for optimum results. |
|
|
|
| |
|
|
 |
Dual-Link DVI CAT6 Receiver, 2x RJ45
DVI-TP-RX100-DL
Supports Dual-Link DVI without HDCP only, Auto and Manual cable equalization modes, Pixel Accurate Re-Clocking, rack-mountable. Requires 2x CAT6a / CAT7 cables for optimum results. |
|
|
|
| Single-Link DVI + HDCP Extenders - 2x CAT6A |
|
|
 |
DVI + HDCP CAT6 Transmitter, 2x RJ45
DVI-TP-TX50-HD
Supports DVI+HDCP and HDMI v1.3, rack-mountable, can be powered via DVIGear MXP Series Routers. Requires 2x CAT6a / CAT7 cables for optimum results. |
|
|
|
| |
|
|
 |
DVI + HDCP + RS232 CAT6 Transmitter, 2x RJ45
DVI-TP-TX100-HD
Supports DVI+HDCP and HDMI v1.3, Advanced EDID Management with 100 memories, RS232 pass-through, rack-mountable, can be powered via DVIGear MXP Series Routers. Requires 2x CAT6a / CAT7 cables for optimum results. |
|
|
|
| |
|
|
 |
DVI + HDCP CAT6 Receiver, 2x RJ45
DVI-TP-RX50-HD
Supports DVI+HDCP and HDMI v1.3, Auto cable equalization, rack-mountable, can be powered via DVIGear MXP Series Routers. Requires 2x CAT6a / CAT7 cables for optimum results. |
|
|
|
| |
|
|
 |
DVI + HDCP + RS232 CAT6 Receiver, 2x RJ45
DVI-TP-RX100-HD
Supports DVI+HDCP and HDMI v1.3, Auto and Manual cable equalization modes, Pixel Accurate Re-Clocking, RS232 pass-through, rack-mountable, can be powered via DVIGear MXP Series Routers. Requires 2x CAT6a / CAT7 cables for optimum results. |
|
|
|
| HDMI Extenders - 1x CAT6A |
|
|
 |
CAT6 Digital Extender Set, HDMI
DVI-7560a
All-digital transmission system uses one (1) high-quality CAT6a cable to extend HDMI links up to 150 ft. (45 meters). Supports most HDMI v1.3 features and resolutions, including 1080p/12-bit deep color. Product is a set of two units: HDMI CAT6 Transmitter (DVI-7561a), and an HDMI CAT6 Receiver (DVI-7562a). |
|
|
|
| |
|
|
 |
CAT6 Digital Transmitter, HDMI
DVI-7561a
CAT6 Transmitter for DVI-7560a. |
|
|
|
| |
|
|
 |
CAT6 Digital Receiver, HDMI
DVI-7562a
CAT6 Receiver for DVI-7560a. |
|
|
|
| |
|
|
 |
CAT6 Digital Repeater, HDMI
DVI-7565a
Optional CAT6 Repeater for DVI-7560a; doubles maximum cable distance. |
|
|
|
| HDMI Extenders - 2x CAT6A |
|
|
 |
HDMI v1.3 CAT6 Transmitter, 2x RJ45
DVI-TP-TX50-HDMI
Supports HDMI v1.3 with HDCP, rack-mountable, can be powered via DVIGear MXP Series Routers. Requires 2x CAT6a / CAT7 cables for optimum results. |
|
|
|
| |
|
|
 |
HDMI v1.3 CAT6 Receiver, 2x RJ45
DVI-TP-RX50-HDMI
Supports HDMI v1.3, Auto cable equalization, rack-mountable, can be powered via DVIGear MXP Series Routers. Requires 2x CAT6a / CAT7 cables for optimum results. |
|
|
|
|
|
|
 |
HDMI v1.3 + RS232 CAT6 Transmitter, 2x RJ45
DVI-TP-TX100-HDMI
Supports HDMI v1.3 with HDCP, Advanced EDID Management with 100 memories, RS232 pass-through, rack-mountable, can be powered via DVIGear MXP Series Routers. Requires 2x CAT6a / CAT7 cables for optimum results. |
|
|
|
| |
|
|
 |
HDMI v1.3 + RS232 CAT6 Receiver, 2x RJ45
DVI-TP-RX100-HDMI
Supports HDMI v1.3 with HDCP, 1x HDMI output, Auto and Manual cable equalization modes, Pixel Accurate Re-Clocking, RS232 pass-through, rack-mountable, can be powered via DVIGear MXP Series Routers. Requires 2x CAT6a / CAT7 cables for optimum results. |
|
|
|
| |
|
|
 |
HDMI v1.3 + RS232 + S/PDIF CAT6 Receiver, 2x RJ45
DVI-TP-RX100-HDMI-A
Supports HDMI v1.3 with HDCP, 1x HDMI output, 1x S/PDIF digital audio output, Auto and Manual cable equalization modes, Pixel Accurate Re-Clocking, RS232 pass-through, rack-mountable, can be powered via DVIGear MXP Series Routers. Requires 2x CAT6a / CAT7 cables for optimum results. |
|
| |
|
| |
 |
HDMI + RS232 Dual Output CAT6 Transmitter, 2x RJ45
DVI-TP-TX200-HDMI
Supports HDMI v1.3 with HDCP, HDMI output for local monitor, Advanced EDID Management with 100 memories, RS232 pass-through, rack-mountable, can be powered via DVIGear MXP Series Routers. Requires 2x CAT6a / CAT7 cables for optimum results. |
|
|
|
| |
|
|
 |
HDMI + RS232 Dual Output CAT6 Receiver, 2x RJ45
DVI-TP-RX200-HDMI
Supports HDMI v1.3 with HDCP, 2x HDMI outputs, Auto and Manual cable equalization modes, Pixel Accurate Re-Clocking, RS232 pass-through, rack-mountable, can be powered via DVIGear MXP Series Routers. Requires 2x CAT6a / CAT7 cables for optimum results. |
|
|
|
| Mounting Hardware |
|
|
 |
Rack Mount Kit for DVI / HDMI CAT6 Extenders
DVI-TP-RMK
19 Rack tray for DVI-TP Series Extenders, accepts four (4) units. |
|
|
|
| |
