
| |
DVI-D High Resolution™ Copper Cables
|
|
|
Superior Performance — DVIGear's High Resolution™ (HR™) Series DVI cables are engineered for superior performance, durability, and value. These cables are capable of supporting high resolution DVI and HDMI signals with cable lengths of up to 10 meters (32.8 ft.).
High-Speed Signals — Long distance transport of high resolution DVI and HDMI signals over copper cables must overcome several challenges, such as insertion loss, differential skew and jitter. Insertion loss is caused by cable capacitance, which acts as a low-pass filter, blocking higher frequency signal components from passing. Skew occurs when the differential DVI and HDMI signals get delayed and become out of phase as they pass over a long cable. Both factors contribute to increased digital jitter, which degrades the performance of the cable. This jitter becomes more severe with higher resolutions and longer cable distances. Conventional cables that support lower resolutions at short distances are often unable to support the data rates required by higher resolutions at longer distances. The resulting video can be disrupted by visual artifacts or may not be visible at all.
Advanced Design — Built to overcome these challenges, the HR™ Series DVI Cables are constructed using heavy gauge 24AWG copper wires. This increases the cross-sectional cable area and decreases the capacitance of the cables, which allows signals with higher data rates to pass without noise and minimal jitter. These features make DVIGear HR™ Series copper cables the ideal solution for applications that require a cost effective solution with flawless signal quality.
Key Features:
- Supports HDTV resolutions up to 1080p with 12-bit color
- Supports PC resolutions up to 1920x1200 and 2048x1080
- Supports HDMI data rates up to 3.4 Gpbs. at lengths up to 5m
- Supports HDMI data rates up to 2.25 Gpbs. at lengths up to 10m
- Supports PC data rates up to 1.65 Gbps.
|
|
- Heavy-duty 24AWG copper wires provide minimal insertion loss
- Ultra-low Skew guarantees unsurpassed digital fidelity
- Triple shielded for superior noise immunity
- Dual UL Ratings: UL13 (CL2) and UL758 (AWM20276). These cables are in-wall rated.
|
Product Designation
|
HR™
|
Product Description
|
24AWG Single-Link DVI-D Cables
|
Input / Output Connectors
|
18+1 DVI Male Connectors
|
Contacts
|
19 pins, 30μ Gold Plated, long life design
|
Shell
|
Gold Flash Plated
|
Standards Compliance
|
DVI 1.0, HDMI 1.3
|
Maximum Pixel Clock Frequency
|
165 MHz - up to 10 meters
225 MHz - up to 10 meters
340 MHz - up to 5.0 meters
|
Maximum Bit Rate (per Channel)
|
1.65 Gbps - up to 10 meters
2.25 Gbps - up to 10 meters
3.40 Gbps - up to 5.0 meters
|
Maximum Bit Rate (Aggregate)
|
4.95 Gbps - up to 10 meters
6.75 Gbps - up to 10 meters
10.2 Gbps - up to 5.0 meters
|
Supported HDTV Resolutions
|
1080p / 60 Hz with 8, 10 and 12-bit color
|
Supported Single-Link PC Resolutions
|
Up to 2048x1080, 1920x1200
|
Supported Dual-Link PC Resolutions
|
n/a
|
Cable Equalization
|
none
|
Voltage Rating
|
75 V
|
Differential Impedance
|
100 ohms ± 5%
|
Insertion Loss (SDD21)
|
< 7.5 dB @ 825 MHz with 10 meter cable
|
Intra-pair Skew
|
< 1.5 nsec (from 250 MHz - 2.5 GHz) with 10 meter cable
|
Inter-pair Skew
|
< 100 psec (from 250 MHz - 2.5 GHz) with 10 meter cable
|
Far End Crosstalk (FEXT)
|
< -5 dB
|
Propagation Delay
|
4.55 nsec/meter
|
Available Cable Lengths (meters) (1)
|
0.2, 0.5, 0.6, 1, 2, 3, 5, 7.5, 10
|
Available Cable Lengths (ft.) (1)
|
0.8, 1.6, 2.1, 3.3, 6.6, 9.8, 16.4, 24.6, 32.8
|
Maximum Cable Length
|
10 meters (32.8 ft.) (1)
|
Construction
|
19 Conductor Cable with 4x high speed twisted pairs
|
High Speed Conductors
|
24AWG, FM-PE+SKIN Construction
|
Shielding
|
Triple Shielding
|
Jacket Material / Color
|
PVC / Red (PMS 209c)
|
Outside Diameter
|
10.50 ± 0.20 mm
|
Minimum Bend Radius
|
40.0 mm
|
Operating Temperature
|
-13° to 140° F (-25° to 60° C)
|
Storage Temperature
|
-40° to 167° F (-40° to 75° C)
|
Humidity (storage / operating)
|
10% to 90% (non-condensing)
|
Compliance
|
UL13 (CL2)
UL758 (AWM20276)
RoHS
|
UL File Numbers
|
AVLV2.E245407
AVLV8.E245407
QPTZ.E245576
|
Limited Warranty
|
3 Years
|
none
|
Note 1: For longer cable lengths, please use DVIGear's Super High Resolution (SHR™) cables.
|
 |
DVI-8511c
DVI-8511c is a 10-inch Adapter Cable that allows the connection of a DVI cable to an HDMI device. It is constructed using lightweight 28 AWG wire, which makes it very flexible.
|
|
|
|