
| |
 |
DisplayPort / mDP 1.4 Active Optical Cables
DVI-27xxx-AOC Series
|
|
|
Shattering Limitations — DVIGear’s HyperLight® Series is a new generation of advanced Active Optical Cables (AOC) that employ cutting edge technology to deliver unprecedented resolution, performance and value. HyperLight cables support DisplayPort 1.4 and provide a wide range of features in a compact, lightweight form‑factor. They are fully HDCP 1.4 / 2.2 compliant and support signals with data rates up to 32.4 Gbps. (HBR3). These features enable HyperLight cables to support very high-resolution applications at 4K / 60Hz (4:4:4) with cable lengths up to 100 meters and 8K / 30Hz (4:4:4) up to 50 meters.
Easily Adaptable — HyperLight cables support both DisplayPort and Mini DisplayPort connections. The cables are terminated with low profile Mini DisplayPort (mDP) connectors that measure only 8x12 mm. This narrow cross‑section makes it very easy to pull these cables through conduit or other tight spaces. An optional Pull Sleeve Kit further simplifies cable pulls. The cables also include two detachable docking connectors that allow them to plug into full-size DisplayPort receptacles. The docking connectors include a locking pin for added security. This functionality enables seamless connections to content servers and use in other high-density applications without any intermediary dongles or adapters.
Easy to Install, Even in Plenum Spaces — HyperLight cables are plenum rated (UL CMP-OF), compact, lightweight, and highly flexible. Constructed using a hybrid design of 4x POF (Polyfluorinated Optical Fiber) and 6x copper wires, they are rugged, yet flexible, with a minimum bend radius of just two millimeters. Their exceptional flexibility makes them an ideal solution for cable routing in tight spaces.
Professional Environments — These cables are designed for use in mission-critical applications where image quality and dependability are paramount. HyperLight cables are engineered from the ground up for superior performance and unfailing reliability with MTBF >150,000 hours. Video signals are transmitted over four optical fibers, which make them immune to interference from environmental noise. The optical transmission path provides a very low RFI / EMI profile, which allows the cables to be installed in sensitive applications with strict security requirements. The cables draw power from the connected DisplayPort source, eliminating the need for an external power supply. HyperLight AOC cables are ideally suited for applications that require ultra-high resolution DisplayPort signals to be extended over long cable runs with flawless image quality.
Key Features:
- Lightweight, compact, flexible, Plenum-rated Active Optical Cables (AOC)
- Low RFI / EMI profile for sensitive applications
- Supports DisplayPort 1.4 HBR3, HDCP 1.4 / 2.2
- Supports data rates up to 8.1 Gbps / lane or 32.4 Gbps total
- Extends resolutions up to 8K / 30 Hz up to 164 ft. (50 meters)
- Extends resolutions up to 4K / 60Hz up to 328 ft. (100 meters)
- Supports direct connection of Mini DisplayPort products
- Detachable Full-Size DisplayPort docking connectors can be secured with locking pin
- Ultra-low Power Design uses power from the DisplayPort source; no power adapter needed
- Supports bidirectional communications over AUX channel for EDID, HDCP, Link Training, etc.
|
Standards Compliance |
DisplayPort 1.4 / HBR3, HDCP 1.4 / 2.2, UL CMP-OF (File E471410) |
Maximum Pixel Clock Frequency |
810 MHz |
Maximum Video Bit Rate |
Supports up to 8.1 Gbps per lane, 32.4 Gbps Total (HBR3) |
Maximum Color Depth |
Up to 30 bits/pixel |
Maximum Supported Resolutions |
4K: 3840×2160 @ at 120 Hz with 24 bits/pixel RGB color
5K: 5120×2880 @ at 60 Hz with 30 bits/pixel RGB color
8K: 7680×4320 @ at 30 Hz with 24 bits/pixel RGB color |
Digital Audio Support |
1-8 channels, 16 or 24-bit Linear PCM, 32-192 kHz sampling rate; maximum bitrate 36 Mbps |
DisplayPort Input / DisplayPort Output |
20-pin DisplayPort Male Connectors with locking latch |
Power |
No external power supply is required. |
AUX Channel Communications |
Supports bidirectional communications for EDID, HDCP, Link Training, etc. |
AUX Channel Data Rate |
1 Mbps |
HDCP Support |
HDCP 1.4 and HDCP 2.2 |
Optical Technology |
4x Discrete Optical Channels, 10 GHz, 850 nm |
Optical Transmitter |
Tx Module: 4x 850 nm Multi-mode VCSELs |
Optical Receiver |
Rx Module: 4x GaAs PIN Photo Diodes |
Fiber Cable Type |
Hybrid cable with 4x POF (Polyfluorinated Optical Fiber) and 6x copper members |
Cable Jacket |
Plenum Rated, Black |
Standard Lengths (meters)(1) |
3, 5, 7.5, 10, 12.5, 15, 20, 25, 30, 40, 50, 60, 75, 80, 90, 100 |
Standard Lengths (feet)(1) |
9.8, 16.4, 24.6, 32.8, 41.0, 49.2, 65.6, 82.0, 98.4, 131.2, 164.0, 196.9, 246.1, 262.5, 295.3, 328.1 |
Maximum Cable Length |
328 ft. / 100 meters(1) |
Product Weight |
Varies with length |
Maximum Tensile Load |
> 200N |
Minimum Bend Radius |
2 mm (fiber and jacket) |
Crush Resistance |
> 500N |
Cable Connector (L x W x H) |
Male Mini-DisplayPort: 1.77" x 0.53" x 0.31" (45.0 mm x 13.4 mm x 8.0 mm) |
Cable Outside Diameter (W x H) |
0.20" x 0.11" (5.1 mm x 2.9 mm) |
Docking Connectors |
Female Mini-DisplayPort to full-size Male DisplayPort |
Construction |
High-impact plastic enclosures with DisplayPort latch and locking pin |
Dimensions (L x W x H) |
2.1" x 0.82" x 0.62" (53.7 mm x 20.8 mm x 15.8 mm) |
Operating Temperature |
-4° to +158° F (-20° to +70° C) |
Storage Temperature |
-4° to +185° F (-20° to +85° C) |
Operating / Storage Humidity |
5% to 85% (non-condensing) |
Power Source |
Powered from DisplayPort source device |
Power Consumption |
< 0.43 watt typical (130 mA @ 3.3 VDC) |
Fiber Optic Cable |
FCC, UL CMP-OF (File E471410), CE, RoHS |
Limited Warranty |
3 Years |
DVI-27xxx-AOC |
DisplayPort v1.4 HyperLight Active Optical Cable ( xxx = length in meters ) |
DVI-27000-RX |
HyperLight Mini-DP-AOC, Passive Docking Connector, Rx |
DVI-27000-TX |
HyperLight Mini-DP-AOC, Passive Docking Connector, Tx |
DVI-2500-AOC-PIN |
HyperLight HDMI Cable Locking Pin (2x) |
DVI-27xxx-AOC-QSG-01 |
1x Quick Start Guide |
DVI-2600-AOC-CVR |
HyperLight Cable Pull Cover |
DVI-2600-AOC-PSK |
HyperLight Pull Sleeve Kit |
Note 1: Cable lengths greater than 50 meters (164.0 feet) can only support DisplayPort 1.2 specifications.
Note 1: All specifications are subject to change without notice.
|
|
HyperLight Cable Pull Cover
DVI-2600-AOC-CVR
Convenient plastic cover protects the Mini DisplayPort connector when the cable is pulled through conduit or other tight confines.
|
|
|
|
|
HyperLight Pull Sleeve Kit
DVI-2600-AOC-PSK
The Pull Sleeve Kit enables installers to safely and easily pull bundles of AOC cables through existing conduit without damaging the cables. Includes 2x Cable Pull Covers.
|
|
|
 |  |  | Cable DisplayPort / mDP 1.4, HyperLight AOC, 3 meters (9.8 ft.)
 $240.00 |  |  |  | Cable DisplayPort / mDP 1.4, HyperLight AOC, 5 meters (16.4 ft.)
 $265.00 |  |  |  |  | Cable DisplayPort / mDP 1.4, HyperLight AOC, 7.5 meters (24.6 ft.)
 $315.00 |  |  |  | Cable DisplayPort / mDP 1.4, HyperLight AOC, 10 meters (32.8 ft.)
 $335.00 |  |  |  |  | Cable DisplayPort / mDP 1.4, HyperLight AOC, 12.5 meters (41.0 ft.)
 $350.00 |  |  |  | Cable DisplayPort / mDP 1.4, HyperLight AOC, 15 meters (49.2 ft.)
 $365.00 |  |  |  |  | Cable DisplayPort / mDP 1.4, HyperLight AOC, 20 meters (65.6 ft)
 $400.00 |  |  |  | Cable DisplayPort / mDP 1.4, HyperLight AOC, 25 meters (82.0 ft.)
 $435.00 |  |  |  |  | Cable DisplayPort / mDP 1.4, HyperLight AOC, 30 meters (98.4 ft)
 $490.00 |  |  |  | Cable DisplayPort / mDP 1.4, HyperLight AOC, 40 meters (131.2 ft.)
 $575.00 |  |  |  |  | Cable DisplayPort / mDP 1.4, HyperLight AOC, 50 meters (164.0 ft.)
 $665.00 |  |  |  | Cable DisplayPort / mDP 1.4, HyperLight AOC, 60 meters (196.9 ft.)
 $770.00 |  |  |  |  | Cable DisplayPort / mDP 1.4, HyperLight AOC, 75 meters (246.1 ft.)
 $855.00 |  |  |  | Cable DisplayPort / mDP 1.4, HyperLight AOC, 80 meters (262.5 ft.)
 $945.00 |  |  |  |  | Cable DisplayPort / mDP 1.4, HyperLight AOC, 90 meters (295.3 ft.)
 $1,035.00 |  |  |  | Cable DisplayPort / mDP 1.4, HyperLight AOC, 100 meters (328.1 ft.)
 $1,120.00 |  |  |  |  | HyperLight Cable Pull Cover
 $19.95 |  |  |  | HyperLight Cable Pull Sleeve Kit
 $49.95 |  |
|