Home > 8K HDMI Fiber Optic Extender

8K HDMI Fiber Optic Extender
8K HDMI Fiber Optic Extender
Model No:  DVI-7366

$1,140.00

Availability: Usually ships the next business day




High-resolution HDMI Signal Management — The DVI-7366 is a high-performance, cost-effective, 8K HDMI Optical Extender designed to meet and exceed even the most demanding system requirements. It supports a wide array of signal types with or without HDCP content protection, provides long-distance extension over a single optical cable, and supports ultra-high resolutions up to 8K (UHD) at 60 Hz (4:4:4).

Multiple Signals Extended over a Single Optical Cable — This extender supports uncompressed HDMI 8K /60p, embedded audio, bi-directional IR, RS 232 and two 10/100 Base-T Ethernet ports, using only a single fiber optic cable. It can extend these signals over cable distances of up to 1968 ft. (600 meters). For added versatility, these units provide Advanced EDID Management with four operating modes: Pass-through, Learn 1, Learn 2, and Factory Default.

The DVI-7366 supports DDC, ARC, and CEC pass-through for a complete HDMI experience. DDC ensures optimal display compatibility, utilizing EDID to enable connected devices to automatically detect the display’s capabilities, ensuring optimal video and audio settings without manual configuration. ARC allows audio to travel from the display to an audio device over the HDMI connection. CEC pass-through maintains HDMI control functions across the extension link, allowing seamless operation of connected devices with fewer remotes.

Advanced Fiber Optic Technology — Each extender set consists of an optical transmitter unit and an optical receiver unit. The transmitter converts the AV signals into light pulses for transmission over a single strand of multi‑mode or single-mode fiber optic cable. The receiver converts these light pulses back to AV signals for the display, as well as other downstream devices. By using advanced fiber optic technology, without any compression, this product provides superior picture quality over greater distances than other extension methods, such as copper cables or CAT-X extenders. Together, these features make the DVI-7366 the ideal, cost-effective solution for system designers and integrators who need to extend high resolution HDMI signals over long distances with flawless image quality.

Key Features:

  • Supports resolutions up to 8K /60p (4:4:4) without compression
  • Extends HDMI, Ethernet (10/100 Base-T), RS-232, and bidirectional IR over a single strand of fiber optic cable
  • HDMI v2.1b, DVI v1.0, HDCP v2.3 compliant
  • Maximum extension distances up to 1968 ft. (600 m) with single-mode fiber; 984 ft. (300 m) with OM4 multi-mode fiber
 
  • Advanced EDID Management with four modes
  • Supports DDC, ARC and CEC pass-through
  • Optical fiber transmission is immune to environmental signal noise
  • Low RFI / EMI profile for sensitive applications
  • Locking DC power connectors for added security and reliability
Performance
Standards Compliance HDMI v2.1b, DVI v1.0, HDCP v2.3
Maximum Video Bit Rate 12Gbps / 48Gbps aggregate over 4x data channels
Supported Transmission Modes Supports TMDS and all Fixed Rate Link modes (FRL1 - FRL6)
Total System Jitter (I/O) 0.6 UI maximum
Inter‑Channel Skew 2 nanoseconds maximum
Ethernet 10/100 BaseT
ARC / eARC Support ARC is supported, eARC is not supported
CEC Support CEC is supported
Supported Color Depth Up to 12-bit per pixel
Maximum Supported Resolutions
4K / 100-120Hz, 4:4:4 5K / 144Hz, 4:4:4 8K / 24-30Hz, 4:4:4
4K / 144Hz, 4:4:4 5K / 144Hz, 4:2:2 8K / 48-60Hz, 4:4:4
4K / 144Hz, 4:2:0 5K / 200-240Hz, 4:2:0 12K / 24-30Hz, 4:2:0
4K / 200-240Hz, 4:2:0    
Digital Audio Support Supports embedded high resolution audio up to 32-channel uncompressed audio and 8-channel, 192kHz, 24-bit uncompressed audio
Connections
HDMI Input / HDMI Output 1 ea. 19-pin Female HDMI connector
Optical 1 ea. LC fiber optic connector
Ethernet 2 ea. RJ-45 female connector
RS-232 1 ea. 3-pin Phoenix connector
IR Input / IR Output IR IN: 1 ea. 3.5mm stereo mini-jack
IR OUT: 1 ea. 3.5mm mini-jack
Power 1 ea. Screw-Locking 2.1 / 5.5 mm female connector
Controls / Indicators
TX Unit Front Panel: EDID Learn button, LEDs for EDID, Power, Optical Link, HPD and Ethernet
Back Panel: EDID Mode selection via 2x DIP switches
RX Unit LEDs for Power, Optical Link, HPD and Ethernet
Optical
Optical Technology CWDM (Coarse Wavelength Division Multiplexing) using 6 optical wavelengths
Laser Diodes 1270 / 1290 / 1310 / 1330nm 12Gbps CWDM DFB Lasers
1490nm / 1550nm 2.5Gbps CWDM DFB Lasers
Photo Diodes 1100 – 1620nm PIN Photo Detectors
WDM Filter Integrated 1270nm / 1290nm / 1310nm / 1330nm / 1490nm / 1550nm filter
Optical Wavelengths / Actual Data Rates TMDS Signals: 1270nm / 1290nm / 1310nm / 1330nm = 12Gbps
DDC, IR, RS-232, Ethernet Signals: 1490nm / 1550nm = 1.25Gbps
Optical Link Power Budget 8.0 dB (minimum)
Cable
Maximum Cable Length
(typical)
9/125μ Single-Mode Fiber: > 600 m
50/125μ OM4 Multi-Mode Fiber: > 300 m
50/125μ OM3 Multi-Mode Fiber: > 250 m
DVIGear Fiber Cable OFNP, Plenum rated – additional data and custom lengths available on request
Cable Jacket OFNP, Plenum rated, Black PVC Jacket
Cable Outside Diameter 0.2" (4.4 mm)
DDC Support
EDID Management / Modes EDID Pass-through (transparent)
EDID Learn 1 / Learn 2 (cached)
Factory Default EDID (1080p 2-Ch audio)
HDCP Support Supports HDMI signals with or without HDCP encryption
Mechanical
Case Dimensions (H x W x D) Without Brackets: 1.0” x 7.5” x 3.9” (26.0 mm x 190.0 mm x 99.5 mm)
Width with Brackets: 8.5" (215.5 mm)
Weight TX Unit: 568g / RX Unit: 563g
Construction High-impact metal enclosure with jet black finish
Mounting Options Mounting Brackets are included
Environmental
Operating Temperature 14° to +158° F (-10° to +70°C)
Storage Temperature -40° to +185° F (-40° to +85°C)
Operating Humidity 5% to 80% (non-condensing)
Storage Humidity 5% to 95% (non-condensing)
Power Requirements
Optical Transmitter / Receiver Both TX and RX units must be powered by the supplied external power adapters
External AC Power Adapters Model No: DVI-72165-PS
Input: 100-240VAC / 50-60Hz 0.8A
Output: 12VDC, 2.0A
Maximum Power Consumption DVI-7366-TX: 550 mA (6.6 watts); DVI-7366-RX: 500 mA (6.0 watts)
Regulatory Approvals
Fiber Optic Extender Unit FCC Class B, CE, RoHS
Laser US-FDA CDRH Class 1
External AC Power Adapters FCC, CE, UL, C-UL, BSMI, CB, CCC, LVD, LPS, PSE, RCM, RoHS, WEEE
Warranty
Limited Warranty 3 Years Parts and Labor
Model Numbers(1)
DVI-7366-TX 8K HDMI Fiber Optic Transmitter, 1x LC
DVI-7366-RX 8K HDMI Fiber Optic Receiver 1x LC
DVI-CUST-OPT Custom Fiber Optic Cable, Plenum-rated,
Specify: Length, Fiber Type (MMF, SMF) and Connectors (LC)
Accessories Included(1)
1x External AC Power Adapter (DVI-72165-PS) with USA plug
1x User Guide
1x 3-Pin Phoenix Connectors (Phoenix p.n. 1840379)
1x IR Transmitter (DVI-7360-IR-TX) (ships with DVI-7366-TX)
1x IR Receiver (DVI-7361-IR-RX) (ships with DVI-7366-RX)
2x Mounting Brackets with Screws
Optional Accessories
External AC Power Adapter (p.n. DVI-72165-PS) with Euro, UK, or Australia plugs
+12 VDC Power Distribution Unit (p.n. DVI-7520-PDU)
Custom Optical Cables (contact DVIGear for details)

Note 1:  The Transmitter and Receiver Units are sold separately. The accessories shown here are included per unit.



 
link to large image
 
link to large image
 
link to large image
 
link to large image

link to large image
 
link to large image
 
link to large image
 
link to large image

link to large image
 
link to large image
 
link to large image
 
link to large image

link to large image
 
link to large image
 
link to large image
 
link to large image

   


Spare Power Supply
DVI-72165-PS

Long Life AC Power Adapter with screw-on male plug. Available with USA, Euro, UK, or Australia AC power connectors.
Price: $39.95

 

DVI-7520-PDU

DVIGear's DVI-7520-PDU Power Distribution Unit is engineered from the ground up for 24/7 mission critical applications. This unit offers an unprecedented level of reliability with an MTBF of greater than 220,000 hours. The DVI-7520-PDU provides +12 VDC power on 8x outputs, each rated for 24 watts. more details >
Price: $450.00

 

available cable lengths from 0.5 - 10 meters

 
 

available cable lengths from 0.5 - 10 meters