| |
|
Power Distribution Unit - 8x 12VDC, 200W
|
|
|
AV Power Management — Many AV products require the use of external AC power supply units (PSU) to power their internal electronic circuitry. These external PSUs (wall warts) can pose a major challenge to system designers as they occupy valuable space within AV equipment racks where there are a limited number of AC outlets. Furthermore, some external PSUs are poorly designed and ill-suited for use in high profile applications.
Exceptional Reliability — DVIGear's DVI-7520-PDU Power Distribution Unit is engineered from the ground up for 24/7 mission critical applications. This unit offers an unprecedented level of reliability with an MTBF of greater than 220,000 hours. The DVI-7520-PDU provides +12 VDC power on 8x outputs, each rated for 24 watts. The unit has an overall power reserve of 200 watts. These features allow system designers and facility managers to optimize power management through more efficient use of rack space, which makes this unit an ideal solution for a wide range of professional applications.
Advanced Design — The DVI-7520-PDU is housed in a rugged 1U half-rack mountable enclosure. It accepts AC line voltages auto-ranging from 88–264 VAC and AC line frequencies from 47–63 Hz. All outputs include extensive protection against overload, over-voltage and over-temperature. Versatile and reliable Phoenix connectors allow for universal connections to various products that require +12 VDC power.
Key Features:
- 1U rack-mountable power supply. Ideal for use with DVIGear's DVI-75xx HDBaseT Extenders.
- Universal AC input (88–264 VAC)
- 8x +12 VDC outputs on Phoenix connectors
- Provides 2A / 24 watts per output, 16.7A / 200 watts total output power
- High reliability — greater than 220,000 MTBF
|
|
- Built-in active PFC function
- High efficiency — up to 89%
- Includes protection for overload, over-voltage and over-temperature
- Designed for use in harsh environments
- 3 year parts and labor warranty
|
|
DC Power Outputs
|
8x
|
|
Output Voltage
|
+12 VDC
|
|
Internal Power Supplies
|
1x
|
|
Total Output Power
|
200 watts
|
|
Total Output Current
|
16.7A
|
|
Maximum Power per Output
|
25 watts
|
|
Maximum Current per Output
|
~ 2.0A
|
|
Maximum AC Current (115 / 230 VAC)
|
2.5A / 1.3A
|
|
AC Line Input Voltage Range
|
88 - 264 VAC
|
|
AC Line Input Frequency Range
|
47 - 63 Hz
|
|
AC Power Input Connector
|
IEC C14 power connector
|
|
DC Power Output Connectors
|
2-pin, 3.5 mm pitch Phoenix connectors
|
|
MTBF
|
> 220,000 hours
|
|
Operating Temperature
|
-22° to +158° F (-30° to +70° C)
|
|
Rack Height
|
1U, 1/2 rack width
|
|
Enclosure
|
Metal enclosure with jet black finish
|
|
Dimensions (W x D x H)
|
8.5" x 12.1" x 1.7"
(214.9 mm x 308.1 mm x 42.4 mm)
|
|
Net Weight
|
5.1 lbs. (2.30 kg)
|
|
Compliance
|
FCC, CE, RoHS, UL — internal power supply
|
|
Warranty
|
3 years Parts and Labor
|
|
Power Extension Cables and Connectors(1)
|
DVI-7520-PSX: 1.6m, Screw Lock 5.5 x 2.1 x 10mm to 2-pin Phoenix (8x included)
DVI-7231-PSX: 1.6m, 5.5 x 2.0 x 9.5mm to 2-pin Phoenix
|
|
Optional Rack Mount Kit
|
DVI-7520-RMK Rack Mount Kit
|
Note 1: Power Extension Cables are sold separately unless otherwise noted.
|
Voltage Range
|
88-264 VAC
|
|
Frequency Range
|
47-63 Hz
|
|
Power Factor (typical)
|
115 VAC: PF>0.98 (at full load)
230 VAC: PF>0.95
|
|
Efficiency (typical)
|
89%
|
|
AC Current (typical)
|
115 VAC: 2.5A 230 VAC 1.3A
|
|
Inrush Current (typical)
|
115 VAC: 20A 230 VAC 40A
|
|
Leakage Current
|
<1mA @ 240VAC
|
|
DC Voltage
|
+12 VDC
|
|
Rated Current
|
16.7 A
|
|
Current Range
|
0 - 16.7 A
|
|
Rated Power
|
200 watts
|
|
Ripple and Noise (maximum)
|
150 mVpp
|
|
Voltage Adjustment Range
|
10 - 13.2 VDC
|
|
Voltage Tolerance
|
±1.0%
|
|
Line Regulation
|
±0.3%
|
|
Load Regulation
|
±0.5%
|
|
Setup Time, Rise Time
|
115 VAC: 3000ms, 50ms (at full load)
230 VAC: 1500ms, 50ms
|
|
Hold-up Time (typical)
|
8ms at full load 115 VAC / 230 VAC
|
|
Overload
|
105 - 135% rated output power
Protection type: Hiccup mode, recovers automatically after fault condition is removed
|
|
Over Voltage
|
13.8 - 16.2 VDC
Protection type: Shut down output voltage, re-power to recover
|
|
Over Temperature
|
Shut down output voltage, recovers automatically after temperature goes down
|
|
Working Temperature, Humidity
|
-22° to +158° F (-30° to +70° C), 20 - 90% relative humidity, non-condensing
|
|
Storage Temperature, Humidity
|
-40° to +185° F (-40° to +85° C), 10 - 95% relative humidity
|
|
Temperature Coefficient
|
±0.03%/°C (+32° to 113°F / +0° to 45°C)
|
|
Vibration
|
10-500 Hz, 2G 10min./1 cycle, 60min. each along X, Y, Z axes
|
|
Safety Standards
|
UL60950-1, TUV EN60950-1, CCC GB4943 approved
|
|
Withstand Voltage
|
I/P-O/P: 3KVAC I/P-FG: 2KVAC O/P-FG: 0.5KVAC
|
|
Isolation Resistance
|
I/P-O/P, l/P-FG, O/P-FG: 100M Ohms / 500VDC / 77°F (25°C) / 70% RH
|
|
EMC Emission
|
Compliance to EN55022 (CISPR22) Class B, EN61000-3-2, -3,GB9254 class B, GB17625.1
|
|
EMC Immunity
|
Compliance to EN61000-4-2, 3, 4, 5, 6, 8, 11, EN55024, light industry level, criteria A
|
|
MTBF
|
Greater than 220,000 hours per MIL-HDBK-217F
|
Note: All parameters NOT specially mentioned are measured at 230 VAC input, rated load and 77°F (25°C) of ambient temperature.
|
|
|
Included Accessory
|
|
|
DVI-7520-PSX
|
|
|
|
|
|
|
|
|
|
DVI-7520-PSX
Power Supply Extension Cable - 2-pin, 3.5 mm pitch Phoenix to Screw lock 5.5 x 2.1mm
|
|
|
|
|
|
DVI-7231-PSX
Power Supply Extension Cable - 2-pin, 3.5 mm pitch Phoenix to Twist Lock 5.5x2.0x9.5mm
|
|
|
|
|
|
DVI-7520-RMK
DVI-7520-RMK is a 1U Rack Mount Kit that allows DVIGear Power Distribution Units (PDU) to be mounted securely within a 19" rack.
|
|
|
|
|
 |  | | Rack Mount Kit for DVI-7520 / DVI-7525 HDMI HDBaseT Extenders
$79.00 | |
|
1.888.463.9927 
+1.770.421.6699
