Wildcat® 4K HDMI CAT6 Extender
Model No: DVI-7570
This unit provides high-performance 4K HDMI extension at a remarkably low cost. It includes support for external IR control signals, as well as de-embedded digital and analog audio outputs. These features make this unit ideal for price sensitive applications where signal quality cannot be compromised.
Key Features
- Supports HDMI 4K /60p, HDCP 2.2 compliant
- Supports resolutions up to 3840x2160 /60p (4:4:4) with visually lossless compression
- Extends HDMI and IR over a single CAT6A cable
- Maximum extension distances: 3840 x 2160 /60p: 98 ft. (30 m) 3840 x 2160 /30p: 230 ft. (70 m)
- Bi-directional Power-over-Cable (POC)
- Buffered HDMI Loop Output on DVI-7570-TX
- Analog and Digital (TOSLINK) De-embedded Audio Output on DVI-7570-RX
- Ultra-compact, low-profile case for easy concealment
- Locking DC power connectors for added security and reliability
- Mounting hardware included
Engineered for Value — DVIGear Wildcat® Extenders utilize new technology that enables them to extend HDMI signals for a fraction of the cost of other twisted pair extenders. This result is achieved using visually lossless compression that allows resolutions up to 3840 x 2160 /60p (4:4:4) to be extended up to 30 meters (98 ft.) over a single CAT6A cable.
Easy to Integrate — The DVI-7570 supports bi-directional Power-over-Cable (POC). This gives integrators and system designers the flexibility to power the extender set at either end of the signal chain. The extenders occupy a minimal amount of space and can easily be concealed thanks to an ultra-compact metal case, which includes all required mounting hardware for a seamless, low-profile installation.
Well-Connected — The extender includes a buffered HDMI Loop Output for a local HDMI display on the Tx side. The Rx units include de-embedded Analog and Digital (TOSLINK) audio outputs to facilitate connections to an external audio system. These features, together with the Wildcat Extender’s exceptional performance, make it the ideal solution for cost-sensitive applications that demand high quality HDMI signal distribution.
| Supported AV Signals | |
| Video | HDMI 4K /60p, DVI 1.0 |
| HDCP | HDCP 1.4 and HDCP 2.2 |
| EDID | Automatic EDID Pass-through from connected display to source |
| Embedded Audio | Supports pass-through of embedded HDMI audio, including LPCM 2.0/2.1/5.1/6.1/7.1, and HBR Bitstream formats |
| De-Embedded Audio | Analog Audio Output: supports Stereo Linear PCM Audio up to 24-bit / 192 kHz Optical S/PDIF Output: supports Stereo Linear PCM Audio up to 24-bit / 192 kHz and Bitstream formats |
| IR Control | Supports IR Pass-through from RX to TX unit |
| Connections / Indicators | |
| CAT Port | 1 ea. shielded RJ45 female connector with LED Power and Signal indicators |
| HDMI Input / HDMI Output | DVI-7570-TX 2ea. 19-pin female HDMI connectors for HDMI In and HDMI Out DVI-7570-RX 1ea. 19-pin female HDMI connector for HDMI Out |
| IR Control | DVI-7570-TX 1ea. IR OUT: 3.5mm Mini-Jack DVI-7570-RX 1ea. IR IN: 3.5mm Mini-Jack |
| Analog Stereo Audio | DVI-7570-RX 1ea. Analog Stereo Audio Out: 3.5mm Mini-Jack |
| Digital Audio | DVI-7570-RX 1ea. S/PDIF Audio Out: TOSLINK Optical Connector |
| Service Port | Micro USB Female |
| DC Power | 1ea. 5.5 mm / 2.0 mm female screw-locking connector |
| Performance | |
| Supported Video Resolutions | Up to 4K /60p with 8-bit color (4:4:4) Up to 4K /60p with 10-bit or 12-bit color (4:2:2 or 4:2:0) In most cases HDMI audio is not supported for resolutions between 1920x1080 and 3840x2160. |
| Supported Video Formats | RGB / YCbCr 4:4:4, YCbCr 4:2:2/4:2:0, YUV 4:4:4 |
| Supported PC Resolutions | Up to 3840x2160 / 60 Hz |
| Maximum Pixel Clock Frequency | Supports pixel clock rates up to 600 MHz |
| Maximum Video Bit Rate | Supports digital signal bit rates up to 6.0 Gbps./color, 18.0 Gbps. total |
| Video Signal Latency | 6x Lines Total (3x Lines on TX and 3x Lines on RX) |
| Built-in ESD Protection | Human body model: ±8KV (air-gap discharge) and ±4KV (contact discharge) |
| Recommended CAT Cable | CAT6A S/FTP (500 MHz) AWG 23, or CAT7 (Europe); Compliant with TIA/EIA-568B termination standard |
| Maximum Cable Distance | 4K /60p: up to 98 ft. (30 meters) using CAT6A S/FTP (500 MHz) AWG 23 cable 4K /30p: up to 230 ft. (70 meters) using CAT6A S/FTP (500 MHz) AWG 23 cable |
| HDMI Input Cable Equalization | Supports DVIGear's HR™ Series HDMI with cable lengths up to 5 meters at 4K /60p resolution |
| Power | |
| Typical Power Consumption | 3.84 watts total |
| Power Extension | Bi-directional Power over CAT6A cable |
| External AC Power Adapter | Input: 100-240VAC, 50-60Hz Output: +12VDC @ 1.0A |
| Mechanical | |
| Construction | Heavy-duty steel enclosure with jet black finish |
| Dimensions (H x W x D) | Each Unit: 0.72" x 2.42" x 3.47" (18.3 x 61.4 x 88.2 mm) |
| Weight | DVI-7570-TX 5.64 oz (160 grams) DVI-7570-RX 5.47 oz (155 grams) |
| Environmental | |
| Operating Temp. (Environment) | +32° to +104°F (0° to +40°C) |
| Typical Case Temperature | Tx Unit: 103.1°F (39.5°C) Rx Unit: 92.5°F (33.6°C) |
| Storage Temp. (Environment) | -4° to +158°F (-20° to +70°C) |
| Operating / Storage Humidity | 10% to 90% (non-condensing) |
| Regulatory Approvals | |
| TX / RX Units | FCC, CE, RoHS |
| External AC Power Adapter | FCC, CE, UL, C-UL, BSMI, CB, CCC, LVD, LPS, PSE, RCM, RoHS, WEEE |
| Warranty | |
| Limited Warranty | 3 Years Parts and Labor |
| Model Numbers | |
| DVI-7570 | 4K HDMI CAT6 Extender Set |
| DVI-7570-TX | 4K HDMI CAT6 Transmitter |
| DVI-7570-RX | 4K HDMI CAT6 Receiver |
| Accessories Included | |
1x External AC Power Adapter (DVI-72165-PS) with USA plug 1x Quick Start Guide 1x IR Transmitter 1x IR Receiver 4x Mounting Brackets | |
Power Supply, +12VDC with Screw-On Connector
DVI-72165-PS
+12 VDC at 2.0 A with a 5.5 x 2.1 mm Screw-On connector.
HDMI High Resolution™ Copper Cables
DVI-25XX-HR
HDMI to DVI-D High Resolution™ Copper Cables
DVI-24XX-HR