8K HDMI Fiber Optic Extender, 1x LC
Model No: DVI-7366
Extends uncompressed HDMI 8K /60p (4:4:4), embedded audio, Ethernet, RS-232 and bidirectional IR over one fiber. Range: up to 600 m (1,968 ft) on single-mode or 300 m (~ 1,000 ft) on multimode fiber.
Key Features
- Supports resolutions up to 8K /60p (4:4:4) without compression
- Extends HDMI, Ethernet (10/100 Base-T), RS-232, and bidirectional IR over a single strand of fiber optic cable
- HDMI v2.1b, DVI v1.0, HDCP v2.3 compliant
- Supports embedded high resolution audio
- Maximum extension distances up to 1968 ft. (600 m) with single-mode fiber; 984 ft. (300 m) with OM4 multi-mode fiber
- Advanced EDID Management with four modes
- Supports DDC, ARC and CEC pass-through
- Optical fiber transmission is immune to environmental signal noise
- Low RFI / EMI profile for sensitive applications
- Locking DC power connectors for added security and reliability
- Heavy-duty mounting brackets are included
High-resolution HDMI Signal Management — The DVI-7366 is a high-performance, cost-effective, 8K HDMI Optical Extender designed to meet and exceed even the most demanding system requirements. It supports a wide array of signal types with or without HDCP content protection, provides long-distance extension over a single optical cable, and supports ultra-high resolutions up to 8K (UHD) at 60 Hz (4:4:4).
Multiple Signals Extended over a Single Optical Cable — This extender supports uncompressed HDMI 8K /60p, embedded audio, bi-directional IR, RS 232 and two 10/100 Base-T Ethernet ports, using only a single fiber optic cable. It can extend these signals over cable distances of up to 1968 ft. (600 meters). For added versatility, these units provide Advanced EDID Management with four operating modes: Pass-through, Learn 1, Learn 2, and Factory Default.
The DVI-7366 supports DDC, ARC, and CEC pass-through for a complete HDMI experience. DDC ensures optimal display compatibility, utilizing EDID to enable connected devices to automatically detect the display’s capabilities, ensuring optimal video and audio settings without manual configuration. ARC allows audio to travel from the display to an audio device over the HDMI connection. CEC pass-through maintains HDMI control functions across the extension link, allowing seamless operation of connected devices with fewer remotes.
Advanced Fiber Optic Technology — Each extender set consists of an optical transmitter unit and an optical receiver unit. The transmitter converts the AV signals into light pulses for transmission over a single strand of multi-mode or single-mode fiber optic cable. The receiver converts these light pulses back to AV signals for the display, as well as other downstream devices. By using advanced fiber optic technology, without any compression, this product provides superior picture quality over greater distances than other extension methods, such as copper cables or CAT-X extenders. Together, these features make the DVI-7366 the ideal, cost-effective solution for system designers and integrators who need to extend high resolution HDMI signals over long distances with flawless image quality.
| Performance | |
| Standards Compliance | HDMI v2.1b, DVI v1.0, HDCP v2.3 |
| Maximum Video Bit Rate | 12 Gbps / 48 Gbps aggregate over 4x data channels |
| Supported Transmission Modes | Supports TMDS and all Fixed Rate Link modes (FRL1 - FRL6) |
| Total System Jitter (I/O) | 0.6 UI maximum |
| Inter-Channel Skew | 2 nanoseconds maximum |
| Ethernet | 10/100 BaseT |
| ARC / eARC Support | ARC is supported, eARC is not supported |
| CEC Support | CEC is supported |
| Supported Color Depth | Up to 12-bit per pixel |
| Maximum Supported Resolutions | 4K / 100-120 Hz, 4:4:4 4K / 144 Hz, 4:4:4 4K / 144 Hz, 4:2:0 4K / 200-240 Hz, 4:2:0 5K / 144 Hz, 4:4:4 5K / 144 Hz, 4:2:2 5K / 200-240 Hz, 4:2:0 8K / 24-30 Hz, 4:4:4 8K / 48-60 Hz, 4:4:4 12K / 24-30 Hz, 4:2:0 |
| Digital Audio Support | Supports embedded high resolution audio up to 32-channel uncompressed audio and 8-channel, 192 kHz, 24-bit uncompressed audio |
| Connections | |
| HDMI Input / HDMI Output | 1 ea. 19-pin Female HDMI connector |
| Optical | 1 ea. LC fiber optic connector |
| Ethernet | 2 ea. RJ-45 female connector |
| RS-232 | 1 ea. 3-pin Phoenix connector |
| IR Input / IR Output | IR IN: 1 ea. 3.5 mm stereo mini-jack IR OUT: 1 ea. 3.5 mm mini-jack |
| Power | 1 ea. Screw-Locking 2.1 / 5.5 mm female connector |
| Controls / Indicators | |
| TX Unit | Front Panel: EDID Learn button, LEDs for EDID, Power, Optical Link, HPD and Ethernet Back Panel: EDID Mode selection via 2x DIP switches |
| RX Unit | LEDs for Power, Optical Link, HPD and Ethernet |
| Optical | |
| Optical Technology | CWDM (Coarse Wavelength Division Multiplexing) using 6 optical wavelengths |
| Laser Diodes | 1270 / 1290 / 1310 / 1330 nm 12 Gbps CWDM DFB Lasers 1490 nm / 1550 nm 2.5 Gbps CWDM DFB Lasers |
| Photo Diodes | 1100 – 1620 nm PIN Photo Detectors |
| WDM Filter | Integrated 1270 nm / 1290 nm / 1310 nm / 1330 nm / 1490 nm / 1550 nm filter |
| Optical Wavelengths / Actual Data Rates | TMDS Signals: 1270 nm / 1290 nm / 1310 nm / 1330 nm = 12 Gbps DDC, IR, RS-232, Ethernet Signals: 1490 nm / 1550 nm = 1.25 Gbps |
| Optical Link Power Budget | 8.0 dB (minimum) |
| Cable | |
| Maximum Cable Length (typical) | 9/125μ Single-Mode Fiber: > 1968 ft. ( > 600 meters) 50/125μ OM4 Multi-Mode Fiber: > 984 ft. ( > 300 meters) 50/125μ OM3 Multi-Mode Fiber: > 820 ft. ( > 250 meters) |
| DVIGear Fiber Cable | OFNP, Plenum rated – additional data and custom lengths available on request |
| Cable Jacket | OFNP, Black PVC Jacket |
| Cable Outside Diameter | 0.2" (4.4 mm) |
| DDC Support | |
| EDID Management / Modes | EDID Pass-through (transparent) EDID Learn 1 / Learn 2 (cached) Factory Default EDID (1080p 2-Ch audio) |
| HDCP Support | Supports HDMI signals with or without HDCP encryption |
| Mechanical | |
| Case Dimensions (H x W x D) | Without Brackets: 1.0" x 7.5" x 3.9" (26.0 mm x 190.0 mm x 99.5 mm) Width with Brackets: 8.5" (215.5 mm) |
| Weight | TX Unit: 568g / RX Unit: 563g |
| Construction | High-impact metal enclosure with jet black finish |
| Mounting Options | Mounting Brackets are included |
| Environmental | |
| Operating Temperature | 14° to +158° F (-10° to +70° C) |
| Storage Temperature | -40° to +185° F (-40° to +85° C) |
| Operating Humidity | 5% to 80% (non-condensing) |
| Storage Humidity | 5% to 95% (non-condensing) |
| Power Requirements | |
| Optical Transmitter / Receiver | Both TX and RX units must be powered by the supplied external power adapters |
| External AC Power Adapters | Model No: DVI-72165-PS Input: 100-240 VAC / 50-60 Hz 0.8A Output: 12 VDC, 2.0 A |
| Maximum Power Consumption | DVI-7366-TX: 550 mA (6.6 watts) DVI-7366-RX: 500 mA (6.0 watts) |
| Regulatory Approvals | |
| Fiber Optic Extender Unit | FCC Class B, CE, RoHS |
| Laser | US-FDA CDRH Class 1 |
| External AC Power Adapters | FCC, CE, UL, C-UL, BSMI, CB, CCC, LVD, LPS, PSE, RCM, RoHS, WEEE |
| Warranty | |
| Limited Warranty | 3 Years Parts and Labor |
| Model Numbers | |
| DVI-7366-TX | 8K HDMI Fiber Optic Transmitter, 1x LC |
| DVI-7366-RX | 8K HDMI Fiber Optic Receiver 1x LC |
| DVI-CUST-OPT | Custom Fiber Optic Cable, Plenum-rated, Specify: Length, Fiber Type (MMF, SMF) and Optical Connectors (LC) |
| Accessories Included | |
1x External AC Power Adapter (DVI-72165-PS) with USA plug 1x User Guide 1x 3-Pin Phoenix Connectors (Phoenix p.n. 1840379) 1x IR Transmitter (DVI-7360-IR-TX) (ships with DVI-7366-TX) 1x IR Receiver (DVI-7361-IR-RX) (ships with DVI-7366-RX) 2x Mounting Brackets with Screws | |
| Optional Accessories | |
External AC Power Adapter (p.n. DVI-72165-PS) with Euro, UK, or Australia plugs +12 VDC Power Distribution Unit (p.n. DVI-7520-PDU) Custom Optical Cables (contact DVIGear for details) | |
| Product Notes | |
The Transmitter and Receiver Units are sold separately. The accessories shown here are included per unit. | |
Data Sheet
DVI-7366_Data.pdf
User Guide
DVI-7366_Manual.pdf
Application Drawing
DVI-7366_ApDrawing.pdf
IR Signal Path
DVI-7366_IR-Signal-Path.pdf
Mounting Options
DVI-7366_Mounting-Options.pdf
Technical Drawing
DVI-7366_Technical-Drawing.pdf
Block Diagram
DVI-7366_Block-Diagram.pdf
Power Supply, +12VDC with Screw-On Connector
DVI-72165-PS
+12 VDC at 2.0 A with a 5.5 x 2.1 mm Screw-On connector.
Power Distribution Unit - 8x 12VDC, 200W
DVI-7520-PDU
This single half-rack width PDU delivers a total of 200 watts of +12 VDC power on eight separate outputs, each rated for 25 watts.
HDMI High Resolution™ Copper Cables
DVI-25XX-HR
HDMI to DVI-D High Resolution™ Copper Cables
DVI-24XX-HR